Wine rack plans – There are two main types of racks of wine: those that maintain horizontal bottles and those in which rests the bottle upside down. The frame itself could be made of metal, wood or plastic, according to personal taste, with prices running into the thousands of dollars to house a large collection.
Design Considerations wine rack plans, the design of a wine rack is determined by the number of bottles of wine that have or will pick up. If you plan on having a large collection, a large rack cabinet size is the way to go. On the other hand, a small collection would only require a wine rack table. In general, if you are storing more than 30 bottles of wine, a rack cabinet size is the best choice. Storing the bottle upside down has the same effect, but with the added drawback of an inverted label. Make sure your wine rack is at least 7 inches deep to accommodate all who put the bottles horizontally.
Wine rack plans, Building a frame scalloping, cut six holes 4 inches in diameter in each of the nine-by-6 boards 36 with the drill column. Cut 1 3/4 inches on each side and leave 1 1/4 inches between holes. Cut the boards in half lengthwise so that they split in half hole. Cut a piece of plywood 36 inches wide. Glue and screw the sheet of plywood from third to an open side of the assembly. This is the back of your wine rack now completed. This frame is easily expandable by adding another support and festooned plates.